Site requested for five new Chemical Dosing pumps to be installed that can deliver at higher output.1. Upon arrival I can see there has been multiple Caustic and Ferric leaks within both dosing cabinets.2. I wiped down all of the contaminated areas, so when we do...

Kiosks and Tanks were marked out on their corresponding plinths for being landed on. 2. Worked with the crane hire company to land the tanks and kiosk, for them then to be bolted to the ground, securing them in place.3. We then installed  the containment for the...

(Dismantle - Fault Find – Refurbish - Rebuild)1. The faulty bearing block.2. Because I did not have a C-Spanner, I used a pump shaft key and Stilsons to unscrew the labyrinth lock nut.3. Dislodged labyrinth drive end.4. Labyrinth drive end removed.5. The shims.6....

Dismantle – Fault Find – Refurbish - RebuildThe Rotork for the new outlet valve at bed 29 was reported faulty by control.Once I had the report we liaised with the electricians for a plan to inspect.We all headed down to SSF bed 29 to inspect the Rotork and be prepared...

(Dismantle – Fault Find – Refurbish - Rebuild)Unfortunately, I’d like to start that I have no pictures of the disassembly of the pump. As we knew the bearing block was fine, it was a matter of urgency that we had it put back in due to the demand the GAC had. The pump...